Wet effect beautifying treatment for aggregates and pavements

It is a beautifying treatment for facades and pavements, both indoors and outdoors, based on special resins, additives and solvents. It is a treatment that permeates the support and increases the tone generating an appearance as if the support were wet, enhancing the liveliness of the pavement.

APLICATIONS

As a beautifying, in any type of facade or pavement of mineral support, which by client's desire needs to enhance its appearance, providing greater liveliness with the obtaining of the wet effect.

TECHNICAL CHARCATERISTICS

Finish: Transparent líquid
Colour: Colorless
Relative density (25Cº): 0,81 gr/cc
Viscosity: 12 seconds (Forte Cup) a 20ºC

METHOD OF EMPLOYMENT

The support must be firm, completely dry and clean, that is to say free of badly adhering parts, cement slurries, oils, greases, dust, etc. Stir in container well before use, in order to homogenize. The product is supplied ready for use, applies conventional fvorma: brush, roller or gun.

Normally one layer of product is sufficient, two can be applied.

Keep containers tightly closed after application. The solvent could evaporate, favor the formation of skins and the product would lose its properties.

PERFORMANCE

The material performance depends of the absortion capacity of the support and the layer applied. Approximately yields from 6 to 8 m2 / liter per layer.

PRESENTATION

It comes in boxes of 12 cans of 1 liter, 4 cans of 4 liters or in cans of 25 liters

STORAGE CONDITIONS

It is advisable to store in a cool and dry place. Sheltered from frost and high temperatures.

CONSERVATION

It is kept for at least 1 year in its original closed container, in order to avoid losses due to evaporation. In the case of prolonged storage, it is advisable to shake the containers before use, in order to homogenize the product.

SECURITY AND HYGIENE

For handling, the usual preventive measures for the handling of chemical products should be observed, such as wearing glasses and gloves, washing hands before a break and at the end of work. Do not eat, drink or smoke during use.

It is an easily flammable product. Keep out of reach of any flame or heat source during the application. Try good ventilation.

The elimination of the product and its packaging must be done in accordance with current legislation and is the responsibility of the final holder. Upon request, the product safety data sheet is supplied.

Programa FEDER ERP Certificado de calidad ISO 9001

“Esta actuación está cofinanciada por la Unión Europea a través del Programa Operativo FEDER de la Comunitat Valenciana 2014-2020”